EVGA GeForce GT 1030 SC Low Profile
vs
Sapphire Nitro+ Radeon RX 5700 XT 8G SE

The EVGA GeForce GT 1030 SC Low Profile has 384 shader units and these clock a maximum of 1.54 GHz which results in an FP32 computing power of 1.19 TFLOPS.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE has 2560 shader units and these clock at a maximum of 2.04 GHz and achieve an FP32 computing power of 10.42 TFLOPS.

The EVGA GeForce GT 1030 SC Low Profile is equipped with a graphics chip of the Pascal architecture, which has 3 streaming multiprocessors.

The graphics card Sapphire Nitro+ Radeon RX 5700 XT 8G SE is based on the RDNA 1 architecture and is equipped with 40 execution units.

The EVGA GeForce GT 1030 SC Low Profile is equipped with a 2 GB large GDDR5 graphics memory, which is equipped with 1.502 GHz clocks.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE has a 8 GB large GDDR6 graphics memory and the memory clock is 1.800GHz.

The EVGA GeForce GT 1030 SC Low Profile has a turbo clock of 1.544 GHz. The turbo frequency of the Sapphire Nitro+ Radeon RX 5700 XT 8G SE is 2.035 GHz.

The EVGA GeForce GT 1030 SC Low Profile has connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 97 °C.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE is equipped with a 2 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 99 °C.

The graphics processor and graphics memory of the EVGA GeForce GT 1030 SC Low Profile are cooled with a Air cooling.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE is cooled by a Air cooling.

The EVGA GeForce GT 1030 SC Low Profile supports the downward compatible copy protection HDCP in version 2.2.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE supports HDCP in version 2.3 and all previous versions.

The EVGA GeForce GT 1030 SC Low Profile supports the DirectX standard from Microsoft in version 12_1.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE supports Microsoft's DirectX version 12_2 (Ultimate).

This area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load.

The EVGA GeForce GT 1030 SC Low Profile is -- wide and therefore needs the space of 3 PCIe-Slots in the case.

The width of the Sapphire Nitro+ Radeon RX 5700 XT 8G SE is -- and thus requires the space of 3 PCIe-Slots in the PC case.

Manufactured using the 14 nanometer process, EVGA GeForce GT 1030 SC Low Profile was released in Q2/2017.

The Sapphire Nitro+ Radeon RX 5700 XT 8G SE published in Q3/2019 is manufactured with a structure width of 7 nanometers.