Sapphire Pulse ITX Radeon RX 570 4G G5
vs
Sapphire NITRO+ Radeon RX 570 4G G5

The Sapphire Pulse ITX Radeon RX 570 4G G5 is based on the AMD Radeon RX 570 (GCN 4) and has 4 GB GDDR5 graphics memory with a bandwidth of 224 GB/s.

The Sapphire NITRO+ Radeon RX 570 4G G5 is based on the AMD Radeon RX 570 (GCN 4) and has 4 GB GDDR5 graphics memory with a bandwidth of 224 GB/s.

The Sapphire Pulse ITX Radeon RX 570 4G G5 has the Polaris 20 XL graphics chip installed, which is based on the GCN 4 architecture.

The Sapphire NITRO+ Radeon RX 570 4G G5 is based on the graphics chip Polaris 20 XL, which comes from the GCN 4 architecture.

The graphics memory of the Sapphire Pulse ITX Radeon RX 570 4G G5 clocks at 1.750 GHz, which corresponds to a speed of 7.0 Gbps.

The graphics memory speed of the Sapphire NITRO+ Radeon RX 570 4G G5 is 7.0 Gbps and the clock speed is 1.750 GHz.

The clock frequency of a graphics card determines the speed in connection with the graphics architecture.

The Sapphire Pulse ITX Radeon RX 570 4G G5 is powered by 1 x 6-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 150 W.

The Sapphire NITRO+ Radeon RX 570 4G G5 has 1 x 6-Pin, 1 x 8-Pin PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 195 W+ 30 %.

The Sapphire Pulse ITX Radeon RX 570 4G G5 is equipped with a total of 1 Axial main fans.

The Sapphire NITRO+ Radeon RX 570 4G G5 has 2 Axial main fans that cool the GPU and memory.

Up to 4 screens can be operated with the Sapphire Pulse ITX Radeon RX 570 4G G5.

The Sapphire NITRO+ Radeon RX 570 4G G5 supports the operation of a maximum of 4 monitors.

With the Sapphire Pulse ITX Radeon RX 570 4G G5 it is possible to operate a screen with a maximum resolution of up to 7680x4320 pixels.

The maximum supported resolution of the Sapphire NITRO+ Radeon RX 570 4G G5 is 7680x4320 pixels.

The support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card.

The Sapphire Pulse ITX Radeon RX 570 4G G5 is connected to the system via PCIe 3.0 x 16 lanes and requires 2 PCIe-Slots space in the housing.

The Sapphire NITRO+ Radeon RX 570 4G G5 needs the space of 3 PCIe-Slots in the case and has a PCIe 3.0 x 16 Lanes interface.

The Sapphire Pulse ITX Radeon RX 570 4G G5 has been manufactured with a structure width of 14 nanometers since Q3/2017.

The Sapphire NITRO+ Radeon RX 570 4G G5 came on the market in Q3/2017 and will have a structure width of 14 nanometers manufactured.