INNO3D GeForce GTX 1060 Twin X2 V2 6GB
vs
Manli GeForce GTX 1630 (M1434+N600)

The INNO3D GeForce GTX 1060 Twin X2 V2 6GB is based on the NVIDIA GeForce GTX 1060 6GB (Pascal) and has 6 GB GDDR5 graphics memory with a bandwidth of 192 GB/s.

The Manli GeForce GTX 1630 (M1434+N600) is based on the NVIDIA GeForce GTX 1630 (Turing) and has 4 GB GDDR6 graphics memory with a bandwidth of 96 GB/s.

The INNO3D GeForce GTX 1060 Twin X2 V2 6GB has the GP106-400-A1 graphics chip installed, which is based on the Pascal architecture.

The Manli GeForce GTX 1630 (M1434+N600) is based on the graphics chip TU117-150, which comes from the Turing architecture.

The graphics memory of the INNO3D GeForce GTX 1060 Twin X2 V2 6GB clocks at 2.002 GHz, which corresponds to a speed of 8.0 Gbps.

The graphics memory speed of the Manli GeForce GTX 1630 (M1434+N600) is 12.0 Gbps and the clock speed is 1.500 GHz.

The clock frequency of a graphics card determines the speed in connection with the graphics architecture.

The INNO3D GeForce GTX 1060 Twin X2 V2 6GB is powered by 1 x 6-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 120 W.

The Manli GeForce GTX 1630 (M1434+N600) has PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 75 W.

The INNO3D GeForce GTX 1060 Twin X2 V2 6GB is equipped with a total of 2 Axial main fans.

The Manli GeForce GTX 1630 (M1434+N600) has 1 Axial main fans that cool the GPU and memory.

Up to 4 screens can be operated with the INNO3D GeForce GTX 1060 Twin X2 V2 6GB.

The Manli GeForce GTX 1630 (M1434+N600) supports the operation of a maximum of 3 monitors.

With the INNO3D GeForce GTX 1060 Twin X2 V2 6GB it is possible to operate a screen with a maximum resolution of up to 7680x4320 pixels.

The maximum supported resolution of the Manli GeForce GTX 1630 (M1434+N600) is 7680x4320 pixels.

The support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card.

The INNO3D GeForce GTX 1060 Twin X2 V2 6GB is connected to the system via PCIe 3.0 x 16 lanes and requires 2 PCIe-Slots space in the housing.

The Manli GeForce GTX 1630 (M1434+N600) needs the space of 2 PCIe-Slots in the case and has a PCIe 3.0 x 8 Lanes interface.

The INNO3D GeForce GTX 1060 Twin X2 V2 6GB has been manufactured with a structure width of 16 nanometers since Q3/2016.

The Manli GeForce GTX 1630 (M1434+N600) came on the market in Q2/2022 and will have a structure width of 12 nanometers manufactured.