INNO3D GeForce GTX 1070 Ti Jet
vs
INNO3D GeForce RTX 2080 SUPER JET

The INNO3D GeForce GTX 1070 Ti Jet has 2432 shader units and these clock a maximum of 1.68 GHz which results in an FP32 computing power of 8.19 TFLOPS.

The INNO3D GeForce RTX 2080 SUPER JET has 3072 shader units and these clock at a maximum of 1.82 GHz and achieve an FP32 computing power of 11.15 TFLOPS.

The INNO3D GeForce GTX 1070 Ti Jet is equipped with a graphics chip of the Pascal architecture, which has 199 streaming multiprocessors.

The graphics card INNO3D GeForce RTX 2080 SUPER JET is based on the Turing architecture and is equipped with 48 execution units.

The INNO3D GeForce GTX 1070 Ti Jet is equipped with a 8 GB large GDDR5 graphics memory, which is equipped with 2.002 GHz clocks.

The INNO3D GeForce RTX 2080 SUPER JET has a 8 GB large GDDR6 graphics memory and the memory clock is 1.938GHz.

The INNO3D GeForce GTX 1070 Ti Jet has a turbo clock of 1.683 GHz. The turbo frequency of the INNO3D GeForce RTX 2080 SUPER JET is 1.815 GHz.

The INNO3D GeForce GTX 1070 Ti Jet has 1 x 8-Pin connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 94 °C.

The INNO3D GeForce RTX 2080 SUPER JET is equipped with a 1 x 6-Pin, 1 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 89 °C.

The graphics processor and graphics memory of the INNO3D GeForce GTX 1070 Ti Jet are cooled with a Air cooling.

The INNO3D GeForce RTX 2080 SUPER JET is cooled by a Air cooling.

The INNO3D GeForce GTX 1070 Ti Jet supports the downward compatible copy protection HDCP in version 2.2.

The INNO3D GeForce RTX 2080 SUPER JET supports HDCP in version 2.2 and all previous versions.

The INNO3D GeForce GTX 1070 Ti Jet supports the DirectX standard from Microsoft in version 12_1.

The INNO3D GeForce RTX 2080 SUPER JET supports Microsoft's DirectX version 12_2 (Ultimate).

This area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load.

The INNO3D GeForce GTX 1070 Ti Jet is -- wide and therefore needs the space of 2 PCIe-Slots in the case.

The width of the INNO3D GeForce RTX 2080 SUPER JET is -- and thus requires the space of 2 PCIe-Slots in the PC case.

Manufactured using the 16 nanometer process, INNO3D GeForce GTX 1070 Ti Jet was released in Q4/2017.

The INNO3D GeForce RTX 2080 SUPER JET published in Q3/2019 is manufactured with a structure width of 12 nanometers.