INNO3D GeForce GTX 1070 Ti Jet
vs
ZOTAC GAMING GeForce RTX 2070 Blower

The INNO3D GeForce GTX 1070 Ti Jet has 2432 shader units and these clock a maximum of 1.68 GHz which results in an FP32 computing power of 8.19 TFLOPS.

The ZOTAC GAMING GeForce RTX 2070 Blower has 2304 shader units and these clock at a maximum of 1.62 GHz and achieve an FP32 computing power of 7.46 TFLOPS.

The INNO3D GeForce GTX 1070 Ti Jet is equipped with a graphics chip of the Pascal architecture, which has 199 streaming multiprocessors.

The graphics card ZOTAC GAMING GeForce RTX 2070 Blower is based on the Turing architecture and is equipped with 36 execution units.

The INNO3D GeForce GTX 1070 Ti Jet is equipped with a 8 GB large GDDR5 graphics memory, which is equipped with 2.002 GHz clocks.

The ZOTAC GAMING GeForce RTX 2070 Blower has a 8 GB large GDDR6 graphics memory and the memory clock is 1.750GHz.

The INNO3D GeForce GTX 1070 Ti Jet has a turbo clock of 1.683 GHz. The turbo frequency of the ZOTAC GAMING GeForce RTX 2070 Blower is 1.620 GHz.

The INNO3D GeForce GTX 1070 Ti Jet has 1 x 8-Pin connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 94 °C.

The ZOTAC GAMING GeForce RTX 2070 Blower is equipped with a 1 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 89 °C.

The graphics processor and graphics memory of the INNO3D GeForce GTX 1070 Ti Jet are cooled with a Air cooling.

The ZOTAC GAMING GeForce RTX 2070 Blower is cooled by a Air cooling.

The INNO3D GeForce GTX 1070 Ti Jet supports the downward compatible copy protection HDCP in version 2.2.

The ZOTAC GAMING GeForce RTX 2070 Blower supports HDCP in version 2.2 and all previous versions.

The INNO3D GeForce GTX 1070 Ti Jet supports the DirectX standard from Microsoft in version 12_1.

The ZOTAC GAMING GeForce RTX 2070 Blower supports Microsoft's DirectX version 12_2 (Ultimate).

This area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load.

The INNO3D GeForce GTX 1070 Ti Jet is -- wide and therefore needs the space of 2 PCIe-Slots in the case.

The width of the ZOTAC GAMING GeForce RTX 2070 Blower is -- and thus requires the space of 2 PCIe-Slots in the PC case.

Manufactured using the 16 nanometer process, INNO3D GeForce GTX 1070 Ti Jet was released in Q4/2017.

The ZOTAC GAMING GeForce RTX 2070 Blower published in Q4/2018 is manufactured with a structure width of 12 nanometers.