GPU comparison with benchmarksThe INNO3D GeForce RTX 3060 iChiLL X3 RED is based on the NVIDIA GeForce RTX 3060 (Ampere) and has 12 GB GDDR6 graphics memory with a bandwidth of 360 GB/s.
The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU is based on the AMD Radeon RX 560 (16 CU) (GCN 4) and has 2 GB GDDR5 graphics memory with a bandwidth of 112 GB/s. |
||
GPUThe INNO3D GeForce RTX 3060 iChiLL X3 RED has the GA106-300-A1 graphics chip installed, which is based on the Ampere architecture. The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU is based on the graphics chip Polaris 21 XT, which comes from the GCN 4 architecture. |
||
INNO3D GeForce RTX 3060 iChiLL X3 RED | GPU | SAPPHIRE PULSE Radeon RX 560 2G G5 16CU |
NVIDIA GeForce RTX 3060 | Based on | AMD Radeon RX 560 (16 CU) |
GA106-300-A1 | GPU Chip | Polaris 21 XT |
Ampere | Architecture | GCN 4 |
28 | Streaming Multiprocessors | 16 |
3584 | Shader | 1024 |
48 | Render Output Units | 16 |
112 | Texture Units | 64 |
28 | Raytracing Cores | 0 |
MemoryThe graphics memory of the INNO3D GeForce RTX 3060 iChiLL X3 RED clocks at 1.875 GHz, which corresponds to a speed of 15.0 Gbps. The graphics memory speed of the SAPPHIRE PULSE Radeon RX 560 2G G5 16CU is 7.0 Gbps and the clock speed is 1.750 GHz. |
||
12 GB | Memory Size | 2 GB |
GDDR6 | Memory Type | GDDR5 |
1.875 GHz | Memory Clock | 1.750 GHz |
15.0 Gbps | Memory Speed | 7.0 Gbps |
360 GB/s | Memory bandwidth | 112 GB/s |
192 bit | Memory Interface | 128 bit |
Clock SpeedsThe clock frequency of a graphics card determines the speed in connection with the graphics architecture. |
||
1.320 GHz | Base Clock | 1.090 GHz |
1.837 GHz | Boost Clock | 1.300 GHz |
1.78 GHz | Avg (Game) Clock | |
Yes | Overclocking | Yes |
Thermal DesignThe INNO3D GeForce RTX 3060 iChiLL X3 RED is powered by 1 x 8-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 170 W. The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU has 1 x 6-Pin PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 90 W. |
||
170 W | TDP | 90 W |
-- | TDP (up) | -- |
93 °C | Tjunction max | 97 °C |
1 x 8-Pin | PCIe-Power | 1 x 6-Pin |
Cooler & FansThe INNO3D GeForce RTX 3060 iChiLL X3 RED is equipped with a total of 3 Axial main fans. The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU has 1 Axial main fans that cool the GPU and memory. |
||
Axial | Fan-Type | Axial |
3 x 92 mm | Fan 1 | 1 x 90 mm |
-- | Fan 2 | -- |
Air cooling | Cooler-Type | Air cooling |
0 dB | Noise (Idle) | 0 dB |
33 dB | Noise (Load) | -- |
ConnectivityUp to 4 screens can be operated with the INNO3D GeForce RTX 3060 iChiLL X3 RED. The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU supports the operation of a maximum of 4 monitors. |
||
4 | Max. Displays | 4 |
2.3 | HDCP-Version | 2.2 |
1x HDMI v2.1 | HDMI Ports | 1x HDMI v2.0 |
3x DP v1.4a | DP Ports | 1x DP v1.4 |
-- | DVI Ports | 1 |
-- | VGA Ports | -- |
-- | USB-C Ports | -- |
FeaturesetWith the INNO3D GeForce RTX 3060 iChiLL X3 RED it is possible to operate a screen with a maximum resolution of up to 7680x4320 pixels. The maximum supported resolution of the SAPPHIRE PULSE Radeon RX 560 2G G5 16CU is 5120x2880 pixels. |
||
7680x4320 | Max. resolution | 5120x2880 |
12_2 (Ultimate) | DirectX | 12 |
Yes | Raytracing | No |
Yes | DLSS / FSR | Yes |
ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light | LED | No LED lighting |
Supported Video CodecsThe support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card. |
||
Decode / Encode | h264 | Decode / Encode |
Decode / Encode | h265 / HEVC | Decode / Encode |
Decode | AV1 | No |
Decode | VP8 | Decode |
Decode | VP9 | Decode |
DimensionsThe INNO3D GeForce RTX 3060 iChiLL X3 RED is connected to the system via PCIe 4.0 x 16 lanes and requires 3 PCIe-Slots space in the housing. The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU needs the space of 2 PCIe-Slots in the case and has a PCIe 3.0 x 8 Lanes interface. |
||
300 mm | Length | 210 mm |
135 mm | Height | 112 mm |
-- | Width | 36 mm |
3 PCIe-Slots | Width (Slots) | 2 PCIe-Slots |
-- | Weight | -- |
PCIe 4.0 x 16 | GPU Interface | PCIe 3.0 x 8 |
Additional dataThe INNO3D GeForce RTX 3060 iChiLL X3 RED has been manufactured with a structure width of 8 nanometers since Q1/2021. The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU came on the market in Q3/2017 and will have a structure width of 14 nanometers manufactured. |
||
C30603-12D6X-1671VA39A | Part-no | -- |
Q1/2021 | Release date | Q3/2017 |
469 $ | Launch Price | 99 $ (Reference) |
8 nm | Structure size | 14 nm |
data sheet | Documents | data sheet |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |
INNO3D GeForce RTX 3060 iChiLL X3 RED
12 GB GDDR6 |
|||
SAPPHIRE PULSE Radeon RX 560 2G G5 16CU
2 GB GDDR5 |