KFA2 GeForce GTX 1050 Ti OC
vs
Palit GeForce GTX 1650 StormX D6

The KFA2 GeForce GTX 1050 Ti OC is based on the NVIDIA GeForce GTX 1050 Ti (Pascal) and has 4 GB GDDR5 graphics memory with a bandwidth of 112 GB/s.

The Palit GeForce GTX 1650 StormX D6 is based on the NVIDIA GeForce GTX 1650 (GDDR6) (Turing) and has 4 GB GDDR6 graphics memory with a bandwidth of 192 GB/s.

The KFA2 GeForce GTX 1050 Ti OC has the GP107-400-A1 graphics chip installed, which is based on the Pascal architecture.

The Palit GeForce GTX 1650 StormX D6 is based on the graphics chip TU117-300-A1 / TU106-125-A1 / TU116-150-KA-A1, which comes from the Turing architecture.

The graphics memory of the KFA2 GeForce GTX 1050 Ti OC clocks at 1.752 GHz, which corresponds to a speed of 7.0 Gbps.

The graphics memory speed of the Palit GeForce GTX 1650 StormX D6 is 12.0 Gbps and the clock speed is 1.500 GHz.

The clock frequency of a graphics card determines the speed in connection with the graphics architecture.

The KFA2 GeForce GTX 1050 Ti OC is powered by connectors. The TDP (Thermal Design Power) of the graphics card is 75 W.

The Palit GeForce GTX 1650 StormX D6 has 1 x 6-Pin PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 75 W.

The KFA2 GeForce GTX 1050 Ti OC is equipped with a total of 1 Axial main fans.

The Palit GeForce GTX 1650 StormX D6 has 1 Axial main fans that cool the GPU and memory.

Up to 3 screens can be operated with the KFA2 GeForce GTX 1050 Ti OC.

The Palit GeForce GTX 1650 StormX D6 supports the operation of a maximum of 3 monitors.

With the KFA2 GeForce GTX 1050 Ti OC it is possible to operate a screen with a maximum resolution of up to 7680x4320 pixels.

The maximum supported resolution of the Palit GeForce GTX 1650 StormX D6 is 7680x4320 pixels.

The support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card.

The KFA2 GeForce GTX 1050 Ti OC is connected to the system via PCIe 3.0 x 16 lanes and requires 2 PCIe-Slots space in the housing.

The Palit GeForce GTX 1650 StormX D6 needs the space of 2 PCIe-Slots in the case and has a PCIe 3.0 x 16 Lanes interface.

The KFA2 GeForce GTX 1050 Ti OC has been manufactured with a structure width of 14 nanometers since Q4/2016.

The Palit GeForce GTX 1650 StormX D6 came on the market in Q2/2020 and will have a structure width of 12 nanometers manufactured.