Palit GeForce GTX 1070 Founders Edition
vs
KFA2 GeForce GTX 1050 Ti EXOC White

The Palit GeForce GTX 1070 Founders Edition is based on the NVIDIA GeForce GTX 1070 (Pascal) and has 8 GB GDDR5 graphics memory with a bandwidth of 256 GB/s.

The KFA2 GeForce GTX 1050 Ti EXOC White is based on the NVIDIA GeForce GTX 1050 Ti (Pascal) and has 4 GB GDDR5 graphics memory with a bandwidth of 112 GB/s.

The Palit GeForce GTX 1070 Founders Edition has the GP104-200-A1 graphics chip installed, which is based on the Pascal architecture.

The KFA2 GeForce GTX 1050 Ti EXOC White is based on the graphics chip GP107-400-A1, which comes from the Pascal architecture.

The graphics memory of the Palit GeForce GTX 1070 Founders Edition clocks at 2.002 GHz, which corresponds to a speed of 8.0 Gbps.

The graphics memory speed of the KFA2 GeForce GTX 1050 Ti EXOC White is 7.0 Gbps and the clock speed is 1.752 GHz.

The clock frequency of a graphics card determines the speed in connection with the graphics architecture.

The Palit GeForce GTX 1070 Founders Edition is powered by 1 x 8-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 150 W.

The KFA2 GeForce GTX 1050 Ti EXOC White has 1 x 6-Pin PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 75 W.

The Palit GeForce GTX 1070 Founders Edition is equipped with a total of 1 Radial main fans.

The KFA2 GeForce GTX 1050 Ti EXOC White has 2 Axial main fans that cool the GPU and memory.

Up to 4 screens can be operated with the Palit GeForce GTX 1070 Founders Edition.

The KFA2 GeForce GTX 1050 Ti EXOC White supports the operation of a maximum of 3 monitors.

With the Palit GeForce GTX 1070 Founders Edition it is possible to operate a screen with a maximum resolution of up to 7680x4320 pixels.

The maximum supported resolution of the KFA2 GeForce GTX 1050 Ti EXOC White is 7680x4320 pixels.

The support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card.

The Palit GeForce GTX 1070 Founders Edition is connected to the system via PCIe 3.0 x 16 lanes and requires 2 PCIe-Slots space in the housing.

The KFA2 GeForce GTX 1050 Ti EXOC White needs the space of 2 PCIe-Slots in the case and has a PCIe 3.0 x 16 Lanes interface.

The Palit GeForce GTX 1070 Founders Edition has been manufactured with a structure width of 16 nanometers since Q2/2016.

The KFA2 GeForce GTX 1050 Ti EXOC White came on the market in Q4/2016 and will have a structure width of 14 nanometers manufactured.