PNY GeForce RTX 2080 Ti Blower (Rev. 2.0)
vs
GALAX GeForce RTX 2080 Ti

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) has 4352 shader units and these clock a maximum of 1.55 GHz which results in an FP32 computing power of 13.45 TFLOPS.

The GALAX GeForce RTX 2080 Ti has 4352 shader units and these clock at a maximum of 1.55 GHz and achieve an FP32 computing power of 13.45 TFLOPS.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) is equipped with a graphics chip of the Turing architecture, which has 68 streaming multiprocessors.

The graphics card GALAX GeForce RTX 2080 Ti is based on the Turing architecture and is equipped with 68 execution units.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) is equipped with a 11 GB large GDDR6 graphics memory, which is equipped with 1.750 GHz clocks.

The GALAX GeForce RTX 2080 Ti has a 11 GB large GDDR6 graphics memory and the memory clock is 1.750GHz.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) has a turbo clock of 1.545 GHz. The turbo frequency of the GALAX GeForce RTX 2080 Ti is 1.545 GHz.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) has 2 x 8-Pin connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 89 °C.

The GALAX GeForce RTX 2080 Ti is equipped with a 2 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 89 °C.

The graphics processor and graphics memory of the PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) are cooled with a Air cooling.

The GALAX GeForce RTX 2080 Ti is cooled by a Air cooling.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) supports the downward compatible copy protection HDCP in version 2.2.

The GALAX GeForce RTX 2080 Ti supports HDCP in version 2.2 and all previous versions.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) supports the DirectX standard from Microsoft in version 12_2 (Ultimate).

The GALAX GeForce RTX 2080 Ti supports Microsoft's DirectX version 12_2 (Ultimate).

This area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load.

The PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) is 40 mm wide and therefore needs the space of 3 PCIe-Slots in the case.

The width of the GALAX GeForce RTX 2080 Ti is 40 mm and thus requires the space of 3 PCIe-Slots in the PC case.

Manufactured using the 12 nanometer process, PNY GeForce RTX 2080 Ti Blower (Rev. 2.0) was released in Q3/2018.

The GALAX GeForce RTX 2080 Ti published in Q3/2018 is manufactured with a structure width of 12 nanometers.