Sapphire NITRO+ Radeon RX 570 4G G5 V3
vs
Sapphire NITRO+ Radeon RX 580 4G G5 V2

The Sapphire NITRO+ Radeon RX 570 4G G5 V3 is based on the AMD Radeon RX 570 (GCN 4) and has 4 GB GDDR5 graphics memory with a bandwidth of 256 GB/s.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 is based on the AMD Radeon RX 580 (36 CU) (GCN 4) and has 4 GB GDDR5 graphics memory with a bandwidth of 224 GB/s.

The Sapphire NITRO+ Radeon RX 570 4G G5 V3 has the Polaris 20 XL graphics chip installed, which is based on the GCN 4 architecture.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 is based on the graphics chip Polaris 20 XT, which comes from the GCN 4 architecture.

The graphics memory of the Sapphire NITRO+ Radeon RX 570 4G G5 V3 clocks at 2.000 GHz, which corresponds to a speed of 8.0 Gbps.

The graphics memory speed of the Sapphire NITRO+ Radeon RX 580 4G G5 V2 is 7.0 Gbps and the clock speed is 1.750 GHz.

The clock frequency of a graphics card determines the speed in connection with the graphics architecture.

The Sapphire NITRO+ Radeon RX 570 4G G5 V3 is powered by 1 x 6-Pin, 1 x 8-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 195 W.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 has 1 x 6-Pin, 1 x 8-Pin PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 235 W.

The Sapphire NITRO+ Radeon RX 570 4G G5 V3 is equipped with a total of 2 Axial main fans.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 has 2 Axial main fans that cool the GPU and memory.

Up to 4 screens can be operated with the Sapphire NITRO+ Radeon RX 570 4G G5 V3.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 supports the operation of a maximum of 4 monitors.

With the Sapphire NITRO+ Radeon RX 570 4G G5 V3 it is possible to operate a screen with a maximum resolution of up to 7680x4320 pixels.

The maximum supported resolution of the Sapphire NITRO+ Radeon RX 580 4G G5 V2 is 7680x4320 pixels.

The support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card.

The Sapphire NITRO+ Radeon RX 570 4G G5 V3 is connected to the system via PCIe 3.0 x 16 lanes and requires 3 PCIe-Slots space in the housing.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 needs the space of 3 PCIe-Slots in the case and has a PCIe 3.0 x 16 Lanes interface.

The Sapphire NITRO+ Radeon RX 570 4G G5 V3 has been manufactured with a structure width of 14 nanometers since Q3/2017.

The Sapphire NITRO+ Radeon RX 580 4G G5 V2 came on the market in Q4/2017 and will have a structure width of 14 nanometers manufactured.