GPU comparison with benchmarksThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED has 4864 shader units and these clock a maximum of 1.73 GHz which results in an FP32 computing power of 16.78 TFLOPS.
The KFA2 GeForce RTX 2070 has 2304 shader units and these clock at a maximum of 1.62 GHz and achieve an FP32 computing power of 7.46 TFLOPS. |
||
GPUThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED is equipped with a graphics chip of the Ampere architecture, which has 38 streaming multiprocessors. The graphics card KFA2 GeForce RTX 2070 is based on the Turing architecture and is equipped with 36 execution units. |
||
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED | GPU | KFA2 GeForce RTX 2070 |
NVIDIA GeForce RTX 3060 Ti | Based on | NVIDIA GeForce RTX 2070 |
GA104-200-A1 | GPU Chip | TU106 |
Ampere | Architecture | Turing |
38 | Streaming Multiprocessors | 36 |
4864 | Shader | 2304 |
80 | Render Output Units | 64 |
152 | Texture Units | 144 |
38 | Raytracing Cores | 36 |
MemoryThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED is equipped with a 8 GB large GDDR6 graphics memory, which is equipped with 1.750 GHz clocks. The KFA2 GeForce RTX 2070 has a 8 GB large GDDR6 graphics memory and the memory clock is 1.750GHz. |
||
8 GB | Memory Size | 8 GB |
GDDR6 | Memory Type | GDDR6 |
1.750 GHz | Memory Clock | 1.750 GHz |
14.0 Gbps | Memory Speed | 14.0 Gbps |
448 GB/s | Memory bandwidth | 448 GB/s |
256 bit | Memory Interface | 256 bit |
Clock SpeedsThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED has a turbo clock of 1.725 GHz. The turbo frequency of the KFA2 GeForce RTX 2070 is 1.620 GHz. |
||
1.410 GHz | Base Clock | 1.410 GHz |
1.725 GHz | Boost Clock | 1.620 GHz |
1.67 GHz | Avg (Game) Clock | |
Yes | Overclocking | Yes |
Thermal DesignThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED has 1 x 8-Pin connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 93 °C. The KFA2 GeForce RTX 2070 is equipped with a 1 x 6-Pin, 1 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 89 °C. |
||
200 W | TDP | 175 W |
220 W | TDP (up) | -- |
93 °C | Tjunction max | 89 °C |
1 x 8-Pin | PCIe-Power | 1 x 6-Pin, 1 x 8-Pin |
Cooler & FansThe graphics processor and graphics memory of the INNO3D GeForce RTX 3060 Ti iCHILL X3 RED are cooled with a Air cooling. The KFA2 GeForce RTX 2070 is cooled by a Air cooling. |
||
Axial | Fan-Type | Radial |
3 x 92 mm | Fan 1 | 1 x 65 mm |
-- | Fan 2 | -- |
Air cooling | Cooler-Type | Air cooling |
0 dB | Noise (Idle) | 0 dB |
35-37 dB | Noise (Load) | -- |
ConnectivityThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED supports the downward compatible copy protection HDCP in version 2.3. The KFA2 GeForce RTX 2070 supports HDCP in version 2.2 and all previous versions. |
||
4 | Max. Displays | 4 |
2.3 | HDCP-Version | 2.2 |
1x HDMI v2.1 | HDMI Ports | 1x HDMI v2.0b |
3x DP v1.4a | DP Ports | 3x DP v1.4a |
-- | DVI Ports | -- |
-- | VGA Ports | -- |
-- | USB-C Ports | 1 |
FeaturesetThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED supports the DirectX standard from Microsoft in version 12_2 (Ultimate). The KFA2 GeForce RTX 2070 supports Microsoft's DirectX version 12_2 (Ultimate). |
||
7680x4320 | Max. resolution | 7680x4320 |
12_2 (Ultimate) | DirectX | 12_2 (Ultimate) |
Yes | Raytracing | Yes |
Yes | DLSS / FSR | Yes |
ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light | LED | No LED lighting |
Supported Video CodecsThis area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load. |
||
Decode / Encode | h264 | Decode / Encode |
Decode / Encode | h265 / HEVC | Decode / Encode |
Decode | AV1 | No |
Decode | VP8 | Decode |
Decode | VP9 | Decode |
DimensionsThe INNO3D GeForce RTX 3060 Ti iCHILL X3 RED is -- wide and therefore needs the space of 2 PCIe-Slots in the case. The width of the KFA2 GeForce RTX 2070 is -- and thus requires the space of 2 PCIe-Slots in the PC case. |
||
300 mm | Length | 283 mm |
135 mm | Height | 139 mm |
-- | Width | 41 mm |
3 PCIe-Slots | Width (Slots) | 2 PCIe-Slots |
-- | Weight | -- |
PCIe 4.0 x 16 | GPU Interface | PCIe 3.0 x 16 |
Additional dataManufactured using the 8 nanometer process, INNO3D GeForce RTX 3060 Ti iCHILL X3 RED was released in Q4/2020. The KFA2 GeForce RTX 2070 published in Q4/2018 is manufactured with a structure width of 12 nanometers. |
||
C306T3-08D6X-1671VA39 | Part-no | 27NSL6UCV2BK |
Q4/2020 | Release date | Q4/2018 |
469 $ | Launch Price | 499 $ (Reference) |
8 nm | Structure size | 12 nm |
data sheet | Documents | data sheet |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |
INNO3D GeForce RTX 3060 Ti iCHILL X3 RED
8 GB GDDR6 |
|||
KFA2 GeForce RTX 2070
8 GB GDDR6 |