The INNO3D GeForce RTX 3060 Ti iCHILL X3 RED is equipped with 38 execution and 4864 shader units. With single precision, a theoretical FP32 computing power of 16.78 TFLOPS is achieved.
- GPU Chip
- GA104-200-A1 (Ampere)
- Streaming Multiprocessors
- 38
- Shader
- 4864
- Render Output Units
- 80
- Texture Units
- 152
- Raytracing Cores
- 38
The INNO3D GeForce RTX 3060 Ti iCHILL X3 RED has a 256 bit wide memory interface, with which a memory bandwidth of 448 GB/s is achieved. In total, 8 GB GDDR6 graphics memory is available for the graphics card.
- Memory Size
- 8 GB
- Memory Type
- GDDR6
- Memory Clock
- 1.750 GHz
- Memory Speed
- 14.0 Gbps
- Memory bandwidth
- 448 GB/s
- Memory Interface
- 256 bit
The manufacturer specifies the memory clock of the INNO3D GeForce RTX 3060 Ti iCHILL X3 RED with 1.410 GHz (base clock) or with 1.725 GHz (turbo clock). If overclocking is supported (see below), the clock rate can be increased even further.
- Base Clock
- 1.410 GHz
- Boost Clock
- 1.725 GHz+4 %
- Avg (Game) Clock
- 1.665 GHz
- Overclocking
- Yes
The INNO3D GeForce RTX 3060 Ti iCHILL X3 RED has 1 x 8-Pin plugs, which supply the graphics card with energy. The maximum operating temperature of the card is 93 °C.
- TDP
- 200 W
- TDP (up)
- 220 W
- Tjunction max
- 93 °C
- PCIe-Power
- 1 x 8-Pin
The INNO3D GeForce RTX 3060 Ti iCHILL X3 RED is equipped with 3 Axial main fans, which are used to cool the graphics processor and graphics memory.
- Fan-Type
- Axial
- Fan 1
- 3 x 92 mm
- Cooler-Type
- Air cooling
- Noise (Idle)
- 0 dB / Silent
- Noise (Load)
- 35-37 dB
Up to 4 screens can be connected to the INNO3D GeForce RTX 3060 Ti iCHILL X3 RED, whereby the backward-compatible HDCP copy protection is supported in the 2.3 version.
- Max. Displays
- 4
- HDCP
- 2.3
- HDMI
- 1x HDMI 2.1
- DisplayPort
- 3x DP 1.4a
The INNO3D GeForce RTX 3060 Ti iCHILL X3 RED supports a maximum resolution of 7680x4320 pixels and the DirectX standard version 12_2 (Ultimate).
- Max. resolution
- 7680x4320
- DirectX
- 12_2 (Ultimate)
- Raytracing
- Yes
- DLSS / FSR
- Yes
- LED
- ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light
Here is a list of which video codecs can be decoded / encoded by the INNO3D GeForce RTX 3060 Ti iCHILL X3 RED in hardware in order to minimize the processor load.
- h264
- Decode / Encode
- h265 / HEVC
- Decode / Encode
- VP8
- Decode
- VP9
- Decode
- AV1
- Decode
The dimensions of the INNO3D GeForce RTX 3060 Ti iCHILL X3 RED are 300 mm in length, 135 mm in height and -- in width. Thus 3 PCIe-Slots are needed in a case.
- Length
- 300 mm
- Height
- 135 mm
- Width (Slots)
- 3 PCIe-Slots
- SFF-Ready
- No
The INNO3D GeForce RTX 3060 Ti iCHILL X3 RED is manufactured in a structure width of 8 nm and has a PCIe 4.0 x 16 lanes interface. The graphics card was released in Q4/2020.
- GPU Interface
- PCIe 4.0 x 16
- Release date
- Q4/2020
- Launch Price
- 469 $
- Structure size
- 8 nm
- Part-no
- C306T3-08D6X-1671VA39
