Sapphire Nitro+ Radeon RX Vega 56 LE
vs
INNO3D GeForce GTX 1080 Ti Jet

The Sapphire Nitro+ Radeon RX Vega 56 LE has 3584 shader units and these clock a maximum of 1.57 GHz which results in an FP32 computing power of 11.26 TFLOPS.

The INNO3D GeForce GTX 1080 Ti Jet has 3584 shader units and these clock at a maximum of 1.58 GHz and achieve an FP32 computing power of 11.34 TFLOPS.

The Sapphire Nitro+ Radeon RX Vega 56 LE is equipped with a graphics chip of the GCN 5 architecture, which has 56 streaming multiprocessors.

The graphics card INNO3D GeForce GTX 1080 Ti Jet is based on the Pascal architecture and is equipped with 28 execution units.

The Sapphire Nitro+ Radeon RX Vega 56 LE is equipped with a 8 GB large HBM2 graphics memory, which is equipped with 0.800 GHz clocks.

The INNO3D GeForce GTX 1080 Ti Jet has a 11 GB large GDDR5X graphics memory and the memory clock is 1.376GHz.

The Sapphire Nitro+ Radeon RX Vega 56 LE has a turbo clock of 1.572 GHz. The turbo frequency of the INNO3D GeForce GTX 1080 Ti Jet is 1.582 GHz.

The Sapphire Nitro+ Radeon RX Vega 56 LE has 2 x 8-Pin connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 100 °C.

The INNO3D GeForce GTX 1080 Ti Jet is equipped with a 1 x 6-Pin, 1 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 91 °C.

The graphics processor and graphics memory of the Sapphire Nitro+ Radeon RX Vega 56 LE are cooled with a Air cooling.

The INNO3D GeForce GTX 1080 Ti Jet is cooled by a Air cooling.

The Sapphire Nitro+ Radeon RX Vega 56 LE supports the downward compatible copy protection HDCP in version --.

The INNO3D GeForce GTX 1080 Ti Jet supports HDCP in version 2.2 and all previous versions.

The Sapphire Nitro+ Radeon RX Vega 56 LE supports the DirectX standard from Microsoft in version 12_1.

The INNO3D GeForce GTX 1080 Ti Jet supports Microsoft's DirectX version 12_1.

This area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load.

The Sapphire Nitro+ Radeon RX Vega 56 LE is 54 mm wide and therefore needs the space of 2 PCIe-Slots in the case.

The width of the INNO3D GeForce GTX 1080 Ti Jet is 54 mm and thus requires the space of 2 PCIe-Slots in the PC case.

Manufactured using the 14 nanometer process, Sapphire Nitro+ Radeon RX Vega 56 LE was released in Q3/2017.

The INNO3D GeForce GTX 1080 Ti Jet published in Q4/2017 is manufactured with a structure width of 16 nanometers.