SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W)
vs
KFA2 GeForce GTX 1060 EXOC 3GB

The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) is based on the AMD Radeon RX 560 (16 CU) (GCN 4) and has 2 GB GDDR5 graphics memory with a bandwidth of 96 GB/s.

The KFA2 GeForce GTX 1060 EXOC 3GB is based on the NVIDIA GeForce GTX 1060 3GB (Pascal) and has 3 GB GDDR5 graphics memory with a bandwidth of 192 GB/s.

The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) has the Polaris 21 XT graphics chip installed, which is based on the GCN 4 architecture.

The KFA2 GeForce GTX 1060 EXOC 3GB is based on the graphics chip GP106-300-A1, which comes from the Pascal architecture.

The graphics memory of the SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) clocks at 1.500 GHz, which corresponds to a speed of 6.0 Gbps.

The graphics memory speed of the KFA2 GeForce GTX 1060 EXOC 3GB is 8.0 Gbps and the clock speed is 2.002 GHz.

The clock frequency of a graphics card determines the speed in connection with the graphics architecture.

The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) is powered by 1 x 6-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 45 W.

The KFA2 GeForce GTX 1060 EXOC 3GB has 1 x 6-Pin PCIe power connectors that supply it with energy. The manufacturer specifies the TDP of the card as 120 W.

The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) is equipped with a total of 1 Axial main fans.

The KFA2 GeForce GTX 1060 EXOC 3GB has 2 Axial main fans that cool the GPU and memory.

Up to 4 screens can be operated with the SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W).

The KFA2 GeForce GTX 1060 EXOC 3GB supports the operation of a maximum of 4 monitors.

With the SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) it is possible to operate a screen with a maximum resolution of up to 5120x2880 pixels.

The maximum supported resolution of the KFA2 GeForce GTX 1060 EXOC 3GB is 7680x4320 pixels.

The support and acceleration of certain video codecs can have a positive impact on the lower energy consumption and less waste heat from the graphics card.

The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) is connected to the system via PCIe 3.0 x 8 lanes and requires 2 PCIe-Slots space in the housing.

The KFA2 GeForce GTX 1060 EXOC 3GB needs the space of 2 PCIe-Slots in the case and has a PCIe 3.0 x 16 Lanes interface.

The SAPPHIRE PULSE Radeon RX 560 2G G5 16CU (45W) has been manufactured with a structure width of 14 nanometers since Q3/2017.

The KFA2 GeForce GTX 1060 EXOC 3GB came on the market in Q3/2016 and will have a structure width of 16 nanometers manufactured.