GALAX GeForce GTX 1070 KATANA
vs
INNO3D GeForce GTX 1660 TWIN X2

The GALAX GeForce GTX 1070 KATANA has 1920 shader units and these clock a maximum of 1.71 GHz which results in an FP32 computing power of 6.56 TFLOPS.

The INNO3D GeForce GTX 1660 TWIN X2 has 1408 shader units and these clock at a maximum of 1.79 GHz and achieve an FP32 computing power of 5.03 TFLOPS.

The GALAX GeForce GTX 1070 KATANA is equipped with a graphics chip of the Pascal architecture, which has 15 streaming multiprocessors.

The graphics card INNO3D GeForce GTX 1660 TWIN X2 is based on the Turing architecture and is equipped with 22 execution units.

The GALAX GeForce GTX 1070 KATANA is equipped with a 8 GB large GDDR5 graphics memory, which is equipped with 2.002 GHz clocks.

The INNO3D GeForce GTX 1660 TWIN X2 has a 6 GB large GDDR5 graphics memory and the memory clock is 2.000GHz.

The GALAX GeForce GTX 1070 KATANA has a turbo clock of 1.708 GHz. The turbo frequency of the INNO3D GeForce GTX 1660 TWIN X2 is 1.785 GHz.

The GALAX GeForce GTX 1070 KATANA has 1 x 8-Pin connectors through which it is supplied with power. The manufacturer specifies the maximum operating temperature of the graphics card as 94 °C.

The INNO3D GeForce GTX 1660 TWIN X2 is equipped with a 1 x 8-Pin PCIe power connector that supplies it with power. The maximum operating temperature of the card is 95 °C.

The graphics processor and graphics memory of the GALAX GeForce GTX 1070 KATANA are cooled with a Air cooling.

The INNO3D GeForce GTX 1660 TWIN X2 is cooled by a Air cooling.

The GALAX GeForce GTX 1070 KATANA supports the downward compatible copy protection HDCP in version 2.2.

The INNO3D GeForce GTX 1660 TWIN X2 supports HDCP in version 2.2 and all previous versions.

The GALAX GeForce GTX 1070 KATANA supports the DirectX standard from Microsoft in version 12_1.

The INNO3D GeForce GTX 1660 TWIN X2 supports Microsoft's DirectX version 12_1.

This area lists which video codecs can be decoded or encoded by the graphics cards in hardware. As a result, the power consumption can be reduced due to a lower processor load.

The GALAX GeForce GTX 1070 KATANA is 16 mm wide and therefore needs the space of 2 PCIe-Slots in the case.

The width of the INNO3D GeForce GTX 1660 TWIN X2 is 16 mm and thus requires the space of 2 PCIe-Slots in the PC case.

Manufactured using the 16 nanometer process, GALAX GeForce GTX 1070 KATANA was released in Q2/2016.

The INNO3D GeForce GTX 1660 TWIN X2 published in Q1/2019 is manufactured with a structure width of 12 nanometers.