Here you will find all technical data as well as various benchmarks of the EVGA GeForce GT 1030 SC Low Profile. Up to 2 screens with a maximum resolution of up to 7680x4320 can be operated with this graphics card. The maximum turbo clock of the EVGA GeForce GT 1030 SC Low Profile is 1.544 GHz, so the graphics card achieves an FP32 computing power of 1.19 TFLOPS.
The EVGA GeForce GT 1030 SC Low Profile is equipped with 3 execution and 384 shader units. With single precision, a theoretical FP32 computing power of 1.19 TFLOPS is achieved.
The EVGA GeForce GT 1030 SC Low Profile has a 64 bit wide memory interface, with which a memory bandwidth of 48 GB/s is achieved. In total, 2 GB GDDR5 graphics memory is available for the graphics card.
The manufacturer specifies the memory clock of the EVGA GeForce GT 1030 SC Low Profile with 1.290 GHz (base clock) or with 1.544 GHz (turbo clock). If overclocking is supported (see below), the clock rate can be increased even further.
1.290 GHz+ 5 %
1.544 GHz+ 5 %
Avg (Game) Clock:
The EVGA GeForce GT 1030 SC Low Profile has plugs, which supply the graphics card with energy. The maximum operating temperature of the card is 97 °C.
Cooler & Fans
The EVGA GeForce GT 1030 SC Low Profile is equipped with 1 Axial main fans, which are used to cool the graphics processor and graphics memory.
1 x 50 mm
Up to 2 screens can be connected to the EVGA GeForce GT 1030 SC Low Profile, whereby the backward-compatible HDCP copy protection is supported in the 2.2 version.
1x HDMI v2.0b
The EVGA GeForce GT 1030 SC Low Profile supports a maximum resolution of 7680x4320 pixels and the DirectX standard version 12_1.
DLSS / FSR:
No LED lighting
Supported Video Codecs
Here is a list of which video codecs can be decoded / encoded by the EVGA GeForce GT 1030 SC Low Profile in hardware in order to minimize the processor load.
h265 / HEVC:
The dimensions of the EVGA GeForce GT 1030 SC Low Profile are 169 mm in length, 69 mm in height and -- in width. Thus 2 PCIe-Slots are needed in a case.
The EVGA GeForce GT 1030 SC Low Profile is manufactured in a structure width of 14 nm and has a PCIe 3.0 x 4 lanes interface. The graphics card was released in Q2/2017.
In order to determine the performance of a graphics card, so-called "benchmarks" are carried out. The benchmark software carries out special calculations to determine the performance of a graphics card. We use so-called theoretical or synthetic benchmarks (e.g. 3D Mark) as well as real game benchmarks. To ensure real comparability of the results, we pay attention to the correct execution of the benchmarks as well as the condition of the graphics card and the system.
We use the following benchmarks to measure the performance of a graphics card:
Notice: We do not take any responsibility for the data shown at our site. Please use at your own risk. Affiliate note: By purchasing via one of our green links or one of the banners, we receive a commission from Amazon