All technical data and various benchmarks of the GIGABYTE GeForce RTX 2080 Ti Windforce 11G are listed on this page. The graphics card is based on the TU102 (Turing) graphics chip, which is manufactured with a structure width of 12 nm. The GIGABYTE GeForce RTX 2080 Ti Windforce 11G can operate up to 4 screens with a maximum resolution of up to 7680x4320 become.
GPU
The GIGABYTE GeForce RTX 2080 Ti Windforce 11G has 68 execution units with 4352 shaders. This gives the graphics card a theoretical FP32 computing power of 13.45 TFLOPS.
The GIGABYTE GeForce RTX 2080 Ti Windforce 11G is equipped with 11 GB graphics memory of the type GDDR6. The memory clock of the graphics card is 1.750 GHz and the speed is 14 Gbps.
Memory Size:
11 GB
Memory Type:
GDDR6
Memory Clock:
1.750 GHz
Memory Speed:
14.0 Gbps
Memory bandwidth:
616 GB/s
Memory Interface:
352 bit
Clock Speeds
The base frequency of this graphics card is 1.350 GHz and the manufacturer specifies the maximum turbo clock as 1.545 GHz. If supported (see below), the performance can be further increased by overclocking.
Base Clock:
1.350 GHz
Boost Clock:
1.545 GHz
Avg (Game) Clock:
Overclocking:
Yes
Thermal Design
The GIGABYTE GeForce RTX 2080 Ti Windforce 11G is powered by 2 x 8-Pin connectors. The TDP (Thermal Design Power) of the graphics card is 250 W.
TDP:
250 W
TDP (up):
320 W
Tjunction max:
89 °C
PCIe-Power:
2 x 8-Pin
Cooler & Fans
Graphics processor and graphics memory of the GIGABYTE GeForce RTX 2080 Ti Windforce 11G are cooled by a Air cooling.
Fan-Type:
Axial
Fan 1:
3 x 80 mm
Fan 2:
--
Cooler-Type:
Air cooling
Noise (Idle):
0 dB / Silent
Noise (Load):
42 dB
Connectivity
Up to 4 monitors can be operated with the GIGABYTE GeForce RTX 2080 Ti Windforce 11G.
Max. Displays:
4
HDCP-Version:
2.2
HDMI Ports:
1x HDMI v2.0b
DP Ports:
3x DP v1.4a
DVI Ports:
--
VGA Ports:
--
USB-C Ports:
1
Featureset
With the GIGABYTE GeForce RTX 2080 Ti Windforce 11G it is possible to operate a screen with a resolution of up to 7680x4320 pixels. Furthermore, the DirectX standard version 12_2 (Ultimate) is supported.
Max. resolution:
7680x4320
DirectX:
12_2 (Ultimate)
Raytracing:
Yes
DLSS / FSR:
Yes
LED:
No LED lighting
Supported Video Codecs
This area lists the video codecs that the GIGABYTE GeForce RTX 2080 Ti Windforce 11G can decode or encode in hardware in order to minimize the processor load, which leads to lower power consumption.
h264:
Decode / Encode
h265 / HEVC:
Decode / Encode
VP8:
Decode
VP9:
Decode
AV1:
No
Dimensions
The GIGABYTE GeForce RTX 2080 Ti Windforce 11G needs the space of 2 PCIe-Slots in a case. It is 280 mm long, 117 mm high and 40 mm wide.
Length:
280 mm
Height:
117 mm
Width:
40 mm
Width (Slots):
2 PCIe-Slots
Weight:
--
Additional data
The GIGABYTE GeForce RTX 2080 Ti Windforce 11G was released in Q3/2018 at a price of 1,599 $. The graphics card manufactured in 12 nm is connected to the system via PCIe 3.0 x 16 lanes.
3DMark is a benchmark program that determines the performance of certain components of a computer and then reports the performance as a numerical value.
Cyberpunk 2077 was developed by CD Projekt Red and is based on the development studio's own REDengine 4. Ray tracing is switched off in our benchmarks.
The theoretical computing power of the graphics card with single precision (32 bit) in TFLOPS indicates how many trillion FP32 floating point operations the graphics card (GPU) can perform per second.
In order to determine the performance of a graphics card, so-called "benchmarks" are carried out. The benchmark software carries out special calculations to determine the performance of a graphics card. We use so-called theoretical or synthetic benchmarks (e.g. 3D Mark) as well as real game benchmarks. To ensure real comparability of the results, we pay attention to the correct execution of the benchmarks as well as the condition of the graphics card and the system.
We use the following benchmarks to measure the performance of a graphics card: