Here you will find all technical data as well as various benchmarks of the ZOTAC GeForce GTX 950 AMP!. Up to 4 screens with a maximum resolution of up to 4096x2160 can be operated with this graphics card. The maximum turbo clock of the ZOTAC GeForce GTX 950 AMP! is 1.405 GHz, so the graphics card achieves an FP32 computing power of 2.16 TFLOPS.
The ZOTAC GeForce GTX 950 AMP! is equipped with 6 execution and 768 shader units. With single precision, a theoretical FP32 computing power of 2.16 TFLOPS is achieved.
The ZOTAC GeForce GTX 950 AMP! has a 128 bit wide memory interface, with which a memory bandwidth of 112 GB/s is achieved. In total, 2 GB GDDR5 graphics memory is available for the graphics card.
The manufacturer specifies the memory clock of the ZOTAC GeForce GTX 950 AMP! with 1.203 GHz (base clock) or with 1.405 GHz (turbo clock). If overclocking is supported (see below), the clock rate can be increased even further.
1.203 GHz+ 17 %
1.405 GHz+ 18 %
Avg (Game) Clock:
The ZOTAC GeForce GTX 950 AMP! has 1 x 6-Pin plugs, which supply the graphics card with energy. The maximum operating temperature of the card is 95 °C.
1 x 6-Pin
Cooler & Fans
The ZOTAC GeForce GTX 950 AMP! is equipped with 2 Axial main fans, which are used to cool the graphics processor and graphics memory.
2 x 90 mm
0 dB / Silent
Up to 4 screens can be connected to the ZOTAC GeForce GTX 950 AMP!, whereby the backward-compatible HDCP copy protection is supported in the 2.2 version.
1x HDMI v2.0
1x DP v1.2
The ZOTAC GeForce GTX 950 AMP! supports a maximum resolution of 4096x2160 pixels and the DirectX standard version 12_1.
DLSS / FSR:
No LED lighting
Supported Video Codecs
Here is a list of which video codecs can be decoded / encoded by the ZOTAC GeForce GTX 950 AMP! in hardware in order to minimize the processor load.
Decode / Encode
h265 / HEVC:
The dimensions of the ZOTAC GeForce GTX 950 AMP! are 208 mm in length, 111 mm in height and 38 mm in width. Thus 2 PCIe-Slots are needed in a case.
The ZOTAC GeForce GTX 950 AMP! is manufactured in a structure width of 28 nm and has a PCIe 3 x 16 lanes interface. The graphics card was released in Q3/2015.
In order to determine the performance of a graphics card, so-called "benchmarks" are carried out. The benchmark software carries out special calculations to determine the performance of a graphics card. We use so-called theoretical or synthetic benchmarks (e.g. 3D Mark) as well as real game benchmarks. To ensure real comparability of the results, we pay attention to the correct execution of the benchmarks as well as the condition of the graphics card and the system.
We use the following benchmarks to measure the performance of a graphics card:
Notice: We do not take any responsibility for the data shown at our site. Please use at your own risk. Affiliate note: By purchasing via one of our green links or one of the banners, we receive a commission from Amazon